Red Line Water Wetter 12 Fl Oz
- Red Line Water Wetter Great for Cars, Trucks, Motorcyles, RVs, ATVs, and Snowmobiles! Use with All Water Cooled Engines Run up to 20 Degrees Cooler, helps control overheating.
- Doubles the wetting ability of water Improves Heat Transfer Reduces cylinder head temperature Reduces rust, corrosion and electrolysis cleans and lubricates water pump seals Can be used with all Antifreeze/Coolants
- Improves the ability of coolant to wet heat transfer surfaces by 50%. This provides significantly better coolant contact in the cylinder head and can reduce coolant and head temperature by as much as 20 degrees F. Can be used with 100% water in racing but does not protect magnesium or after freezing point.
- Bottle 355ml 12 fluid oz
- Red Line WaterWetterÂ® is designed to provide improved metal wetting and excellent corrosion inhibition when added to plain water or a glycol coolant. The most poorly maintained system in an automobile is usually the cooling system. Maintenance is quite simple and only required once each year, but most vehicle owners never routinely change the coolant or replenish the corrosion inhibitors which are required for trouble free operation. Proper cooling system maintenance is very critical for most modern engines which utilize more aluminum. Aluminum has a very high corrosion potential, even higher than zinc, which is very widely used as a sacrificial anode. The only property which enables aluminum to be used in a cooling system is that it will form protective films under the proper conditions which will prevent the uncontrolled corrosive attack of acids or bases. Poor aluminum corrosion inhibition will cause the dissolution of aluminum at the heat rejection surfaces, weakening the cooling system walls and water pump casing and weakening the head gasket mating surfaces. These corrosion products will then form deposits on the lower temperature surfaces such as in radiator tubes which have very poor heat transfer properties, causing a significant reduction in the cooling ability of the entire system. Red Line WaterWetterÂ® will provide the proper corrosion inhibition for all common cooling system metals, including aluminum, cast iron, steel, copper, brass, and lead.